Engine :460 with mild build - 465 HP & 495 Ft/Lb torque
Drivetrain :C6 Auto w/ Stage II Shift Kit & 2400 RPM Stall Converter, Twin-Stick NP205, 4.56 Gears & Detroit Locker in the rear 9".
Transmission :no info
VIN :no info
My fairly stock Bronco. The 460 swap, a mild home-brew suspension lift (Chopped the front coil spring perches off the frame and re-attched 3" lower, then folder the underhangs over and bolted/welded to the frame), some monsterous 1/2" steel plate square-tube bumpers, and built 9" rear. Looking to put an Ox Cable Locker in the front some time and get a good winch!
Comments: Thanks! Yeah, they bow out a little bit. I have the engine and tranny/transfer case out right now for a 460 swap, so they are nice and straight at the moment. :^)
Comments: sweet truck. and that is the exact same way i lifted my 78 bronco. mine is the blue and white one with 40s. and does your coil springs bow a little bit?
Comments: yup and i was just making sure i didn't do something wrong with mine cause we had it apart 3 different times and finally just called it good. oh and what size tires are you running?
Comments (3)
You must login to post a comment.
Reviewed by: Vaughn P 06/16/09 08:02PM
Comments:
Thanks! Yeah, they bow out a little bit. I have the engine and tranny/transfer case out right now for a 460 swap, so they are nice and straight at the moment. :^)
Reviewed by: Dj W 06/16/09 03:35PM
Comments:
sweet truck. and that is the exact same way i lifted my 78 bronco. mine is the blue and white one with 40s. and does your coil springs bow a little bit?
Reviewed by: Dj W 06/17/09 03:27PM
Comments:
yup and i was just making sure i didn't do something wrong with mine cause we had it apart 3 different times and finally just called it good. oh and what size tires are you running?